LINK Systems LinkNet II - Manual (Page 68)

5.2.5 SPM Rates Detail
The SPM rates
detail screen (“SPM
Rates” tab – see
Figure 5.6) shows the
hours, maximum
SPM, average SPM,
standard SPM, and
comparisons between
the current statistics
and the standard, last
run, and all runs for
both overall and
production time. The
overall time is the
total scheduled time
including time when
the press did not run.
The production time
is the total scheduled
time minus the time
the press was down –
that is, the time the
press was actually
running.
Figure 5.6: Machine Detail “SPM Rates” Dialog Box
Additional summarized information (hours and average SPM) about the last run and all previous
runs of the job are provided for comparison.
5.3 The “Window” Menu
The “Window” menu is used to manage multiple windows, such as when reports have been run or
tonnage graphs are displayed. The bottom of the window menu lists all the windows that are open in
LinkNet. The active window is the one with a check mark beside it. Any of these windows may be
made the active window, whether they are visible or not, by either selecting the window from the menu
or by hitting the number key associated with the window. Of course, clicking on any viewable part of a
window will also make that window active.
“Cascade” and “Tile” are two standard ways of arranging the windows. Cascade will stagger the
windows so that the title bars of each window are visible but the windows overlap. Tile will size and
position the windows so that none of the windows overlaps.
5.4 The “Help” Menu
The “Help” menu has a single selection, “About LinkNet2...”. This selection displays a dialog with
the version number of the LinkNet software.
Manual Version 1.1 10/28/2001 5.6