LINK Systems LinkNet II - Manual (Page 48)

Maximum SPM: The maximum SPM at which this tool should be run regardless of the capability of the
machine in which it is run.
Bed Width: The width of the machine bed necessary to hold the tool.
Bed Depth: The depth of the machine bed necessary to hold the tool.
Minimum Tonnage: The minimum tonnage necessary to properly run the tool.
4.11.1.3 Tool Miscellaneous Settings
The “Miscellaneous” settings page contains customer fields for the tool. LinkNet does not directly
use the customer fields. These three fields are provided for custom uses by, of course, the customer.
4.11.1.4 Tool
Notes
The “Notes” settings page provides a space for tool notes.
4.11.2 Editing Tooling
From the tool listing (see Figure 4.27), select a tool and hit the “Edit Tool” button. Alternatively, the
tool can be “double clicked” in the list. The dialog of Figure 4.28 will be displayed. All items except
the tool number may be edited in the same way as adding a tool (see section 4.11.1 for details).
4.11.3 Deleting Tooling
To delete a tool, select it from the tool listing (see Figure 4.27) and click on the “Delete Tool”
button. A message will appear indicating that the selected tool is about to be deleted and will ask for
confirmation. Click the “Yes” button to delete the tool or the “No” button to keep the tool.
Manual Version 1.1 10/28/2001 4.26