LINK Systems LinkNet II - Manual (Page 37)

Meaning: The meaning of the down time code and its intended use can be entered here.
4.8.2.2 Editing a Down Time Code
To Edit a DTC, select a DTC from the down time code listing (see Figure 4.17) and click on the
“Edit DTC” button. Alternatively, the DTC can be “double clicked” in the list. A dialog box similar to
Figure 4.18 will appear. The same options apply as in adding a DTC (see previous section) with the
exception that the numeric code cannot be changed. If the numeric code needs to be changed, delete the
old DTC and add a new one with the desired number.
4.8.2.3 Deleting a Down Time Code
To delete a DTC, select a DTC from the list (see Figure 4.17) and click on the “Delete DTC” button.
A message will appear indicating that the selected DTC is about to be deleted and will ask for
confirmation. Click the “Yes” button to delete the DTC or the “No” button to keep the DTC.
Manual Version 1.1 10/28/2001 4.15