LINK Systems LinkNet II - Manual (Page 39)

4.9.1.1 Machine General Settings
The “General” machine settings page (see Figure 4.20) contains information and settings required
for the proper operation of LinkNet with the machine. The information and settings on this page are:
Detected Equipment: The Link equipment on the press is reported here. If no equipment shows up in
this area, the machine is not communicating with LinkNet.
Machine Number: The number assigned to the machine for the purpose of LinkNet communications.
This number is assigned at the machine and may be up to four numeric digits. The same number must
be set both at the machine and on this page for LinkNet to communicate with the machine.
Property Number: The property number is not directly used by LinkNet but is provided as a
convenience for informational purposes.
Machine Description: This is displayed in the overview screen to help identify the press by something
more easily remembered than a machine number.
Manufacturer: The machine manufacturer is not directly used by LinkNet but is provided as a
convenience for informational purposes.
Model: The machine model number is not directly used by LinkNet but is provided as a convenience
for informational purposes.
4.9.1.2
Machine Physical Characteristics Settings
Figure 4.21: Machine Configuration Physical Characteristics Dialog Box
The “Physical
Characteristics” settings
page (see Figure 4.21)
contains information about
the capacities and size of
the machine. The settings
in this page are not
currently used by LinkNet,
but may be in the future.
At present, these are for
informational purposes.
The information and
settings on this page are:
Show Units In: All units
on this page can be shown
in English or metric units.
Note that values can be
entered in one unit, and
displayed in another.
Tonnage: The tonnage capacity of the press.
Manual Version 1.1 10/28/2001 4.17