LINK Systems LinkNet II - Manual (Page 86)

Stroke
Mode
Drive
Speed
Stroke
Speed
SPM
SPM
200
0
Order
Counter
PC STATUS
Counter OFF
TOP DISP.
CONFIG.
CHANGE
SETTING
0 0
Program/Run Switch
EXIT
ZERO
STROKE
COUNT
ACCESS
CONFIG
AUXILIARY
COMM SETUP
TOP DISPLAY AREA CONFIGURATION
When in a Setup Mode
(Inch, Timed Inch, Etc.)
Area 1: Drive Speed
Area 2: Stroking Speed
Area 3: Distance to Bottom
Area 4: Current Status
Single
Stroke
When in a Production Mode
(Single Stroke, Cont. . . . Etc.)
Area 1: Drive Speed
Area 2: Stroking Speed
Area 3: Order Count
Area 4: Current Status
Date: 03/18/2000
Time: 12:38:25 PM
Rod/Stroke Units:
Rod Length:
Stroke Length:
Operator Terminal Type:
Default Language:
In
30.000 in
7.500 in
Link Standard
English
Figure 8.2: OmniLink Operator Terminal Configuration Screen (Color OIT)
• Push the softkey for
“OPERATOR
TERMINAL”. A
screen like Figure 8.2
should appear.
• Push the
“AUXILIARY
COMM SETUP”
softkey to display the
communications setup
screen, which should
look similar to Figure
8.3 (the port
configurations may
vary depending on
how the particular
machine is set up and
what options have
been installed).
• Use the up and down
arrow keys to
highlight “Port 5" and
hit the “CHANGE
COMM TASK”
softkey until the
description for port 5
reads “LinkNet
Network”.
Stroke
Mode Single Stroke
Drive
Speed
Stroke
Speed
SPM
SPM
0
0 Order
Counter
PC STATUS
Counter OFF
Aux Comm
Setup
EXIT
0 0
Program/Run Switch
TOP
CHANGE
COMM TASK
CONFIGURE
COMM TASK
Port 1: OmniLink 5000 Card Rack Connection
Port 2: Laptop Interface
Port 3:
Port 4: Not Assigned
Port 5:
115200,N,8,1
9600,N,8,1
PLC Interface
19200,O,8,1
LinkNet Network
Figure 8.3: OmniLink Auxiliary Communications Configuration Screen (Color
Terminal)
• Hit the “CONFIG
COMM TASK”
softkey and the
LinkNet configuration
screen should appear.
Highlight the field for
“Machine Number”
and enter the machine
number desired for
this press. If
necessary, highlight
the “Baud Rate” field
and hit the “CHANGE
SETTING” softkey
until it reads “19200".
• Exit back out to the main screen.
Manual Version 1.1 10/28/2001 8.2