Spectrum Controls 1734sc-OE2CIH - Manual (Page 15)

User’s Manual Pub. 0300272-01 Rev. A.0
Chapter 2
Installation and Wiring
This chapter will cover:

Compliance to European Union directives

Power requirements

General considerations

Mounting

Field wiring connections
Section 2.1
Compliance to
European
Union Directives
This product is approved for installation within the European Union and EEA regions. It
has been designed and tested to meet the following directives.
2.1.1 EMC Directive
The 1734sc-OE2CIH module is tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC) and the following standards, in whole or in part,
documented in a technical construction file:

IEC 61000-6-4:2007 Electromagnetic compatibility (EMC)–Part 6-4: Generic
standards–Emission standard for industrial environments

IEC 61000-6-2:2005 Electromagnetic compatibility (EMC)–Part 6-2: Generic
standards–Immunity for industrial environments
This product is intended for use in an industrial environment.
2.1.2 Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC Low Voltage by applying the
safety requirements of EN 61131-2 Programmable Controllers Part 2–Equipment
Requirements and Tests. For specific information required by EN61131-2, see the
appropriate sections in this publication as well as the following Allen-Bradley
publications:

Industrial Automation Wiring and Grounding Guidelines for Noise Immunity
publication 1770-4.1

Automation Systems Catalog publication B113