Dukane ULTRASONIC GENERATOR/POWER SUPPLY LS 403-574-01 - Manual (Page 22)

Page 1
iQ Series ,
Ultrasonic Generator/Power Supply LS User’s Manual
Dukane Manual Part No. 403-574-01
Placing the Generator when Used in
an Active Seismic Region
If the iQ generator is to be used in an active seismic region,
secure the unit by rack-mounting it or by securing the unit
to a benchtop.
Rack- Mounting
Install the four brackets from Dukane's rack-mount kit to
the generator. See Table 3-I, and Figure 3- 4 (showing a
low profile unit) below.
Mount the generator to a 19-inch equipment rack.
Figure 3-4 Rack Mounting iQ Generator
System Type Dukane Part Number
High Profile 147-4721
Low Profile 147-4720
Table 3- I Rack Mount Bracket Part Numbers
400-2251 01
3.82
[97.0]
3.44
[87.3]
3.25
[82.5]
12.57
[319.2]
12.99
[330.0]
ALLOW 5"
BOTH
SIDES
FOR
COOLING
ALLOW 5"
BOTH
SIDES
FOR
COOLING
ALLOW 3" IN BACK FOR CABLES
IN
(mm)
.25 X .50 SLOT
(2 PLCS)
18.76
[476.4]
18.16
[461.2]
17.16
[435.8]
OPTIONAL RACK
MOUNT BRACKETS
147-4720
11.37
[288.9]
.81
[20.6]
.12
[3.0]
NOTE
The figure shows how a
typical iQ generator is rack
mounted. Your generator’s
appearance may be different
from what is shown here.