Datalogic Scanning DS6300 - Manual (Page 21)

INSTALLATION
2
2 INSTALLATION
To install the system follow the given procedure:
• Select the mounting location for DS6300;
• Mount the DS6300 scanner;
• Position the scanner with respect of the barcode;
• Proceed with system electrical connection;
• Install the GENIUS™ program on the PC;
• Adjust the focus position to the reading plane of the barcode.
WARNING
When installing several scanners, take care to position them correctly so
that no laser beam enters the reading window perpendicularly and at the
same level of the output beam of the other scanners. This condition could
occur more frequently for side mounted applications. If these precautions
are not followed, it may occur that the laser of the blinded scanner starts
blinking due to an internal circuit which temporarily turns the laser off
when detecting a power anomaly. To resolve this problem, it is sufficient
to slightly change the inclination and position of one of the two scanners
involved.
Refer to the Reference Documentation for details on connecting
NOTE
your
DS6300 reader to other devices in the system (i.e. C-BOX 100 etc.).
2.1 PACKAGE CONTENTS
Verify that the DS6300 reader and all the parts suppl
ct when opening the packaging; the list of parts inc
ied with the equipment are present and
ta ludes:
barcode test chart
• DS6300 configuration CD-ROM
• Mounting bracket and screws
in
• DS6300 reader
• Installation Quick Reference +
Figure 6 - DS6300 Package Contents
7