Datalogic Scanning DS6300 User Manual
Page 72
DS6300
3
3. Then, proceed with the network setup by using one of the icons available on the Tool
Bar according to the procedure to follow:
=
Net-Autoset procedure
=
Network Wizard procedure
=
Express Network Setup procedure
Net-Autoset
This procedure is to be used when all scanner addresses and labels are unknown (typically
he n
when configuring t
etwork for the first time or whenever a network reconfiguration is
required).
By clicking the
icon or selecting the "Net_Autoset"
-Autoset procedure is started allowing automatic ass
option from the right-click menu, the
t
ignment of random addresses to all
v
Once the procedure has been completed, it is possible to:
bels through the Network Wizard
Ne
sla e or Stand Alone scanners connected within the network.
•
define customized addresses and la
;
•
display the scanner default labels through the Express Network Setup.
xpress Network Setup
Before performing this procedure, a Lonworks address must be assigned to each slave
scanner. The most practical method is through the
Net-Autoset
E
procedure. See par. 3.2.3 for
alternative address assignment methods.
Once all addresses have been assigned, the Express Network Setup is to be used when all
scanner addresses and labels do not need to be modified.
By clicking on the
icon or by choosing the related option from the right-click menu, the
procedure is started which automatically performs the following operations:
- opening
the
wizard;
- polling the network to discover connected scanners;
- transferring all scanners found to the "Requested Devices" area of the wizard where
your network customization is defined;
- saving the new network configuration;
Once the procedure has been completed, a dialog box will appear asking whether to send
the configuration to the Master. Choose the “Yes” option to start this procedure.
58