Datalogic Scanning DS6300 - Manual (Page 45)

INSTALLATION
2
Ethernet Interface
The Ethernet interface (NIC) can be used for TCP/IP communication with remote or local
host computer by connecting the scanner to a LAN as well as with a host PC directly
connected to the scanner.
The following is an example of a connection to a LAN through a Hub using a straight through
cable:
DS6300
5
HUB / SWITCH
3
4
2
1
6
5
3
4
2
1
6
7
8
7
8
RX+
TX-
TX+
RX-
n. c.
n. c.
n. c.
n. c.
n. c. = not connected
Figure 41 – Straight Through Cable
The following is an example of direct connection to a PC using an inverted cable:
DS6300
5
Host PC
3
4
2
1
6
5
1
4
6
3
2
7
8
7
8
Figure 42 – Inverted Cable
For further details refer to the “Ethernet Service Guide" document provided as supplementary
documentation.
31