Main/aux. serial interface and i/o connector, 1 main/aux. serial interface and i/o connector – Datalogic Scanning DS6300 User Manual
Page 31
INSTALLATION
2
2.3.1 Main/Aux. Serial Interface and I/O Connector
The DS6300 master/slave model is equipped with a 25-pin male D-sub connector for
connection to the host computer, power supply and input/output signals.
The DS6300 fieldbus models (Ethernet, DeviceNet, Profibus) adopt a 26-pin male connector
instead of the 25-pin one.
The details of the connector pins are indicated in the following table:
10
19
1
18
9
26
14
1
25
13
Figure 17 - 26-pin Connector
Figure 18 - 25-pin Connector
DS6300 25-pin/26-pin D-sub connector pinout
Pin Name
Function
Chassis - internally connected to GND
1 CHASSIS
Cable shield connected to chassis
20
RXAUX
Receive data of auxiliary RS232 (referred to GND)
21
TXAUX
Transmit data of auxiliary RS232 (referred to GND)
8
OUT 1+
Configurable digital output 1 - positive pin
22
OUT 1-
Configurable digital output 1 - negative pin
11
OUT 2+
Configurable digital output 2 - positive pin
12
OUT 2-
Configurable digital output 2 - negative pin
16
OUT 3A
Configurable digital output 3 - polarity insensitive
17
OUT 3B
Configurable digital output 3 - polarity insensitive
18
EXT_TRIG/PS A External trigger (polarity insensitive) for PS
19
EXT_TRIG/PS B External trigger (polarity insensitive) for PS
6
IN 2/ENC A
Input signal 2 (polarity insensitive) for Encoder
10
IN 2/ENC B
Input signal 2 (polarity insensitive) for Encoder
14
IN 3A
Input signal 3 (polarity insensitive)
15
IN 4A
Input signal 4 (polarity insensitive)
24
IN_REF
Common reference of IN3 and IN4 (polarity insensitive)
9,13
VS
Supply voltage - positive pin
23,25,26 GND
Supply voltage - negative pin
Main Interface Connector Pinout
Pin
RS232
RS485
Full Duplex
RS485
Half Duplex
20 mA C.L.
(INT-30 with C-BOX 100 only)
2
TX
TX485 +
RTX485 +
see INT-30 instructions
3
RX
* RX485 +
4
RTS
TX485 -
RTX485 -
5
CTS
* RX485 -
7 GND_ISO GND_ISO
GND_ISO
Pin 26 is only available for fieldbus models (Ethernet, DeviceNet, Profibus).
* Do not leave floating, see par. "RS485 Full-Duplex Interface" for connection details.
17