Notes, Examples, Gps stop location service request $gpsstop – Synaccess Networks NP-0801DTM User Manual
Page 298: Syntax, Parameters and values
GPS AT COMMANDS SET
HSPA+ AT Commands Reference Guide
298
<service_type_id>
0‐255
255 indicates that this parameter is not used.
Note: <service_type_id> is mandatory with A‐GPS.
<pseudonym_indicator>
0
FALSE: display user name at the external client. Default: 0.
1
TRUE: display user name as anonymous at the external client.
Notes
The current setting is stored through $GPSSAV.
Examples
AT$GPSSLSR= 2,3,,,,,1
OK
GPS Stop Location Service Request $GPSSTOP
Command stops the Receiver in Autonomous or A‐GPS mode initiated through $GPSSLSR set command.
Syntax
Command
Command type
$GPSSTOP=[<abort_cause>]
$GPSSTOP=?
Test
Parameters and Values
<abort_cause>
0
User denies request.
1
Unspecified cause for abort. Default: 1.
2
Cause invalid.
Notes
The current setting is stored through $GPSSAV.
Examples
AT$GPSSTOP
OK