Xtramus MCS-2160 V1.9.2 - Manual (Page 13)

1.3.3.1. System Module Cards
A. System Module Card – XC-SFAN
The XC-SFAN comes with your MCS-2160 chassis, and shall be installed on the Fan slot located on the
far left side of MCS-2160 chassis. This module card provides ventilation for the MCS-2160 chassis.
Also, XC-SFAN’s CTRL + PWR and PWR ports are designed to provide power source and gather
information for MCS-FANT fan tray. When connecting XC-SFAN to MCS-FANT fan tray, please do so by
connect to MCS-SFAN’s CTRL + PWR port to MCS-FANT’s CTRL + PWR port, and XC-SFAN’s PWR
port to MCS-FANT’s PWR port.
If you cross connect between CTRL + PWR port and PWR port of XC-SFAN and MCS-FANT, MCS-2160
will be seriously damaged.
Interface Ports
CTRL + PWR
8-Pin Mini-Din Port which can provide power for MCS-FANT and
system information regarding to MCS-FANT
PWR 8-Pin Mini-Din Port which can provide power for MCS-FANT
LED
Green ON XC-SFAN is power on
Power
Green OFF XC-SFAN is power off
Green ON XC-SFAN is powering up properly
Sys
Green OFF XC-SFAN is power off
Status 0 User-defined LED
Status 1 User-defined LED
*Note: XC-SFAN does not support hot-swap. Please do not draw the XC-SFAN module card from
MCS-2160 chassis when the system is power on.
13
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®