Xtramus MCS-2160 V1.9.2 - Manual (Page 42)

B. Syslog Settings
Syslog Configuration
Syslog Receiver IP
You may set your Syslog Receiver IP in this field. The default
Syslog Receiver IP is 192.168.1.17 .
Apply Apply the changes you’ve made here.
Before accessing Syslog Configuration for MCS-2160, please download and install the 3CDaemon
software. Please refer to the interface of 3CDaemon shown below:
3CDaemon
A
Please choose the Syslog Server option from the left side option of the
3CDaemon interface.
Time Shows the time record of each event.
IP Address The IP address of the source.
Msg Type The type of information currently displayed.
B
Message The currently status of the connected module.
C
This field shows the currently status of each module based on Time, IP
Address, Msg Type and Message. The status to be shown includes: system
turn on/off, hot swap, updating F/W, module link status, IP setting, syslog
setting, user setting, save changes, system reboot, update fan tray, usc
setting, clear counter.
42
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®