Xtramus MCS-2160 V1.9.2 - Manual (Page 41)

3.1.4. MCS-2160 Management Webpage – Management
There are 11 options available for Management, which includes:
• IP Settings: Allows you to set how MCS-2160 will acquire its IP, subnet mask, and gateway
addresses. Also, you could input these addresses manually here.
• Syslog Settings: Shows the link status of each module on 3CDaemon.
• User Settings: Allows you to change MCS-2160’s configuration webpage Password.
• SNMP Settings: Sets the restriction for accessing the SNMP.
• Time Settings: Sets the date and time display of your MCS-2160.
• Mail Settings: Sets the basic info for sending warning e-mail to designated mail box.
• Safety Settings: Sets the temperature in degree centigrade for shutdown your MCS-2160.
• Configuration Settings: You can save and load your MCS-2160 configuration here.
• Media Converter Management: Sets the MCM-W series counter of same LAN to be displayed.
• Chassis Management: Displays the status of MCS-2160 and modules cards, also it allows you to
see the counter, to do the FPGA / Firmware upgrading, to power on/off module card and access
module card’s port settings.
• Chassis Overview: Displays the parameters of each slot of MCS-2160.
A. IP Configuration
IP Configuration
IP Mode
You can choose how MCS-2160 acquires its IP, subnet mask, and
gateway addresses. There are two modes available:
• Static: You have to input MCS-2160’s IP, subnet mask, and
gateway addresses manually in the fields down below.
• DHCP: MCS-2160 acquires its IP, subnet mask, and gateway
addresses automatically from network’s DHCP server.
IP Address You can input MCS-2160’s IP address here in this field.
Subnet Mask You can input MCS-2160’s subnet mask here in this field.
Gateway You can input MCS-2160’s gateway address here in this field.
Apply Apply the changes you’ve made here.
*Note1: The default IP address for MCS-2160 is 192.168.1.8.
41
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®