Xtramus MCS-2160 V1.9.2 - Manual (Page 77)

B. MCS-2160 Telnet Command – ip
Command Descriptions – ip
show The ip show command allows you to view information of MCS-2160’s IP configuration.
status The ip status command allows you to view information of MCS-2160’s IP status.
dhcp
The ip mode dhcp command allows you to set MCS-2160’s IP acquiring mode
to DHCP, allowing MCS-2160 to acquire IP automatically from DHCP server.
mode
static
The ip mode static command allows you to set MCS-2160’s IP acquiring mode
to Static, allowing you to set IP/Subnet Mask/Gateway IP manually.
address*
The ip address <IP Address> command allows you to set MCS-2160’s IP address. For
example, to set MCS-2160’s IP address to 192.168.1.20, please input the command “ip
address 192.168.1.20”.
mask*
The ip mask <Subnet Mask Address> command allows you to set MCS-2160’s subnet
mask address. For example, to set MCS-2160’s subnet mask address to 255.255.255.0,
please input the command “ip mask 255.255.255.0”.
ip
gateway*
The ip gateway <Gateway Address> command allows you to set MCS-2160’s gateway
address. For example, to set MCS-2160’s subnet gateway address to 192.168.1.254,
please input the command “ip gateway 192.168.1.254”.
*MCS-2160’s default IP address/subnet mask/default gateway are 192.168.1.8/255.255.255.0/192.168.1.1
C. MCS-2160 Telnet Command – cls
Command Descriptions – cls
cls The cls command allows you to clear Telnet screen.
D. MCS-2160 Telnet Command – logout
Command Descriptions – logout
logout The logout command allows you to log out of MCS-2160’s Telnet configuration session.
77
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®