Xtramus MCS-2160 V1.9.2 - Manual (Page 58)

d. Upgrade
Click the Upgrade option to pop up the window for Update Firmware and Update FPGA as
shown above.
Update F/W (Firmware)
Browse…
Click the Browse… button to choose the firmware file you would like to
upgrade. MCS-2160’s firmware files are in the format of “*.bin”.
Send Click this button to start upgrading MCS-2160’s firmware.
Update FPGA
Browse…
Click the Browse… button to choose the FPGA file you would like to
upgrade. MCS-2160’s FPGA files are in the format of “*.bin”.
Send Click this button to start upgrading MCS-2160’s FPGA.
When updating the Firmware or FPGA, a progress bar will be displayed as shown below:
When finished updating the Firmware or FPGA, a warning window will pop up as shown below:
58
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®