Xtramus MCS-2160 V1.9.2 - Manual (Page 75)

A. MCS-2160 HyperTerminal Command – system (Continue)
Command Descriptions – system
show Shows the status of snmp v1/v2/v3.
readcommunity
Type command sys snmp readcommunity private or public to
set this option as private or public.
writecommunity
Type command sys snmp writecommunity private or public to
set this option as private or public.
securityname
Type command sys snmp securityname XXX to set the
username as XXX for snmp v3.
authpassword
Type command sys authpassword XXX to set the authpassword
as XXX for snmp v3.
snmp
privpassword
Type command sys authpassword XXX to set the privpassword
as XXX for snmp v3.
snmp v2 enable/disable
Type command sys snmp v2 enable or disable to enable or
disable the snmp v2 function.
snmp v3 enable/disable
Type command sys snmp v3 enable or disable to enable or
disable the snmp v3 function.
show Type command sys time show to display the current time.
time
set
Type command sys time set xx : yy : zz to set your time as hour :
min : sec.
show Type command sys date show to display the current date.
date
set
Type command sys date set xxxx : yy : zz to set your date as
year : month : day.
show Type command sys mail show to display your alarm mail settings.
enable Type command sys mail enable to enable this function.
disable Type command sys mail disable to disable this function.
server
Type command sys mail server XXX to set your pop3 server
address as XXX.
account
Type command sys mail account XXX to set your e-mail box
account as XXX.
password
Type command sys mail password XXX to set your e-mail box
password as XXX.
sma
Type command sys mail sma XXX to set your sender’s e-mail
address as XXX.
dma
Type command sys mail dma XXX to set your destination e-mail
address as XXX.
interval
Type command sys mail interval XX to set your e-mail sending
interval as XX, with setting range 1-65535 minutes.
system
mail
content
Type command sys mail content XX to set your e-mail sending
interval as XX, in which the XX includes Port link state change,
DDMI, Card state change, Power supply change, temperature and
Fan tray warning.
*Note1: the authpassword, privpassword and mail password are case-sensitive.
*Note2: the authpassword, privpassword and mail password must be the same as your webpage settings.
*Note3: for Time and Date seetings please install battery on your XC-M667 module card.
75
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®