BECKHOFF BC3150 - Manual (Page 17)

Safety Instructions
Fieldbus Components 15
3. Mounting and Wiring
Mounting
Dimensions
The Beckhoff Bus Terminal system is characterized by low physical volume and high modularity. When planning a
project it must be assumed that at least one Bus Coupler and a number of Bus Terminals will be used. The
mechanical dimensions of the Bus Couplers are independent of the fieldbus system.
Fig. 1.0 BCxx50
The total width of the fieldbus station is the width of the Bus Coupler/Bus Terminal Controller plus the width of the
Bus Terminals being used (incl. KL9010 bus end terminal). Depending on design, the Bus Terminals are 12 or 24 mm
wide. The height is 100 mm.
The BCxx50 series Bus Terminal Controllers are 68 mm deep.