Selecting the target system, Uploading a bx configuration, Ads serial (all bx and bcxx50-controller) – BECKHOFF BC3150 User Manual
Page 34
Safety Instructions
32
Fieldbus Components
Uploading a BX Configuration
The configuration is transferred to the Bus Terminal Controller via ADS.
ADS serial (all BX and BCxx50-Controller)
Enter the serial ADS connection, as described in section Serial ADS.
ADS fieldbus (only BX3100, BX5100, BX9000, BC3150, BC5150)
A prerequisite is that TwinCAT operates as the master and data exchange is active, i.e. physical and PROFIBUS,
CANopen configuration must be completed, and data must be exchanged from the master (FC310x, FC510x) to the
Bus Terminal Controller.
Selecting the target system
Select the BXxx00/BCxx50 to which you wish to upload the configuration. F8 opens the dialog for downloading the
associated device.
Select the associated Bus Terminal Controller.
The device state (Bus Terminal Controller) is displayed at the bottom right of the System Manager.