BECKHOFF EL9xxx - Manual (Page 40)

Product overview
Technical data
Technical data EL9250 EL9260
Nominal voltage 230 V AC
Power contact current load max. 10 A
Electrical isolation yes
Integrated fine­wire fuse yes; 6.3 A
Current consumption from E­
Bus ­ typ. 90 mA
Bit width in the process image ­ 2 bit (diagnosis)
Configuration no address or configuration settings
Power LED yes
Diagnosis (fuse) yes, Error LED yes, in process image and Error LED
Electrical connection to
mounting rail no
PE contact yes
Weight approx. 55 g
Permissible ambient
temperature range (during
operation) 0°C ... +55°C
Permissible ambient
temperature range (during
storage) ­25°C ... +85°C
Permissible relative humidity 95%, no condensation
Dimensions (W x H x D) approx. 15 mm x 100 mm x 70 mm (width aligned: 12 mm)
Mounting [ } 60] on 35 mm mounting rail conforms to EN 60715
Vibration/shock resistance conforms to EN 60068­2­6/EN 60068­2­27
EMC resistance burst/ESD conforms to EN 61000­6­2/EN 61000­6­4
Protect. class IP 20
Installation pos. variable, see chapter "Mounting of
Passive Terminals [
} 70]"
variable
Approval CE
Connection EL9250, EL9260
CAUTION
Hazard to individuals and devices!
When designing a Bus Terminal block with different potentials on the power contacts (e.g.
230 V AC and 24 V DC), please note that it is mandatory to use potential separation termi­
nals (EL9080)!
Bring the bus system into a safe, powered down state before starting installation, disas­
sembly or wiring of the Bus Terminals!
EL9xxx 40 Version 3.1