Compuprint 2056 User Manual
Page 11
User Manual 2056
MAN10xxx-01 3
3. Put the gap adjust lever to the highest position.
4. Slide the print head to the middle of the printer. (As shown in figure 1-4)
5. Please take out the ribbon cartridge from the box, hold the bottom side of the ribbon nip
and then take out the ribbon nip.
6. Hold both sides of the ribbon cartridge and aim the buckles at the mounting slots of the
printer, then press it firmly until it locks in place. Put the ribbon nip between print head and
ribbon guide slice. (As shown in figure 1-6)
Figure 1-5 Ribbon cartridge
Window
Print head
Figure 1-4 Open the window
Ribbon nip
Ribbon cartridge (PRKN2056)
Ribbon core
Ribbon knob
Note:
Never move the print head while the printer is on, or it may damage the
printer. Also, if you have just used the printer, let the print head cool for a
few minutes before you touch it.