Compuprint 2056 User Manual
Page 56
User Manual 2056
MAN10xxx-01 48
Chapter 5 Printer Maintenance and Technical Service
5.1 Cleaning the Printer
Cleaning periodically and the cleaning tool
Periodical cleaning: Every 3 months or 300 working hours
Cleaning tool: Dry cloth (Use soft cloth to clean metal parts)
Cleaning carriage shaft
There is a layer of oil covered on the carriage shaft which guarantees the carriage runs
smoothly. But the oil is easy to absorb dust, please clean the dust with soft cloth first, and
then add proper lube (NYE180 lube of NYE Company is recommended), move print head
back and forth to make lube scattered.
Cleaning the paper feed path
Wipe off the wasted paper, clean dirt and dust.
5.2 Contact the Technical Service Centre
If malfunction occurs and cannot be solved through the operation shown in 4.2, the
components of the printer are damaged during using or you need to buy some
consumables, please contact the nearest technical service centre.
Figure 5-1 Cleaning the
Carriage shaft
Note: 1. Turn off printer and pull out the power cord before cleaning.
2. Being used under dust circumstance, the carriage shaft may stack
much dust and affect the print quality. Please shorten the cleaning
period.
3. Print head and the surrounding part may be high temperature after
using. Please avoid cleaning it at the moment.
4. Please use a soft cloth for cleaning, do not use combustible solvent.