Compuprint 2056 - Manual (Page 25)

User Manual 2056
MAN10xxx-01 17
9) Return to “Additional Port Information Required”, click “Next”.
10) A window of “Completing the Add Standard TCP/IP Printer Port Wizard” pops up,
click “Finish”.
11) In the selection of “Manufacturers/Printers”, click “Have Disk”, and then click “Next”.
12) A window of “Install From Disk” pops up. Please according to the operating system
environment, such as Windows 2000/XP/Vista/Win7 operating system you should
select the path as follows: CD-ROM → “Drivers” → “WIN2000 (XP-Vista-Win7)”, click
“Open”, then click “OK” to return to the window of “Install Printer Software”, click
“Next”.
13) Follow the direction click “Next” gradually till the installation is finished. At this time,
printer network driver is installed completely.
2. Upgrade-install printer network driver (setting driver’s network port)
If PC has installed the printer’s driver, set driver’s network port to carry out network
printing. The concrete steps are shown below:
1) Click “Start” → “Settings” → Select “Printers”.
2) Right click COMPUPRINT 2056 driver, click “Properties” on the window popping up.
3) A window of “Properties” pops up; click “Ports” and “Add Ports”.