Compuprint 2056 - Manual (Page 31)

User Manual 2056
MAN10xxx-01 23
2.4 Other Function Descriptions of Control Panel
2.4.1 In the Tractor Paper Mode
TEAR
1. In the offline mode, if the paper is at the print position, press TEAR key and the printer
feeds paper to the tear position.
2. In the offline mode, if the paper is at the tear position, press TEAR key and the printer
ejects paper to the next page or to the printing home position of the current page.
LF/FF
In the offline mode, if the paper is at the print position, press the LF/FF key (less than 0.5
second), the printer would feed the paper one line based on current line spacing setting.
Alternatively, hold the LF/FF key down, the printer would load one page of tractor paper.
LOAD/EJECT
1. When the paper is at the ready position, press LOAD/EJECT key, the paper would be fed
into the printing home position automatically.
2. When the paper is at the printing home position, press LOAD/EJECT key in the offline
mode, the paper would return to the ready position.
3. When the paper is at the general print position (not the printing home position), press
LOAD/EJECT
key in the offline mode (less than 0.5 seconds), the paper ejects one line.
Alternatively, hold the LOAD/EJECT key down, the printer would eject one page of tractor
paper if the eject-able page length is more than one page. If the paper eject-able length is
less than one page, the paper would return to the ready position.
4. When the paper is at the tear position, press LOAD/EJECT key, the printer would eject one
page of tractor paper.
ONLINE
1. If the printer has loaded paper in the offline mode, press this key to enter ONLINE mode,
the ONLINE LED is on and the printer enters the print mode.
Press this key in the online mode, the printer is offline, ONLINE LED blinks and the printer
can not print.
2. If the paper is at the tear position in the offline mode, press ONLINE key, the printer would
go back to the printing home position of the current page or that of the next page.
Note: Print speed is divided into Normal print mode (letter mode or normal
speed mode), the high speed mode and the super high speed mode.
If Letter mode is set through online aptitude parameter setting or menu
setup mode, press SPEED key on the control panel when offline, print
speed will switch among letter mode, high speed mode and super high
speed mode.
If any other mode (not including letter mode) is set through online aptitude
parameter setting or menu setup mode, press SPEED key on the control
panel when offline, print speed will switch among normal speed mode,
high speed mode and super high speed mode.
Note: When using tractor paper, if paper is out, please press LOAD/EJECT key
or LF/FF key to feed paper after loading paper again.