Chapter 3 how to use the printer – Compuprint 2056 User Manual
Page 35
User Manual 2056
MAN10xxx-01 27
Chapter 3 How to Use the Printer
Here are the steps of using printer:
1. Install the printer as the description in chapter 1, connect the printer to your computer and
install the driver correctly.
2. Load the correct type of paper.
3. Set the printer if necessary.
4. Send the print command to the printer to print.
3.1 Loading the Paper
In addition to printing on cut sheet and tractor papers, your printer can also print on a wide
variety of paper types, including multi-ply paper, labels and envelopes.
Please make sure the printing contents are all within the printable area while printing. The
correlative printable area, see the Appendix A for reference.
3.1.1 Loading Cut Sheet
1. Make sure the printer is powered off, and open the window of the printer, refers to chapter
Gap Adjust Lever of this manual, pull the gad adjust lever to cut sheet position according
to the paper type.
Figure 3-1 Adjust the gap adjust lever
Caution: When printing on multi-ply paper, the print force is stronger as the
paper is thicker than other common paper. Please make sure the
printing are entirely within the printable area or it can damage the print
head.