Compuprint 2056 - Manual (Page 34)

User Manual 2056
MAN10xxx-01 26
2.5 Paper Select Lever
Paper select lever is to set the printing mode for cut sheet or tractor paper. For cut sheet,
you need to pull the paper select lever to the position for cut sheet before loading. For tracor
paper, pull the paper select lever to the position for tractor paper before loading.
2.6 Paper Feed Knob
The paper feed knob is used to feed paper or eject paper manually. In general, it’s better not
to use it.
2.7 The Gap Adjust Lever
Please adjust the gap adjust lever according to the paper thickness. The factory default setting is
suitable for standard office paper.
POSITION PAPER TYPE
-1 Reserved
0 Cut sheet
1 2 plies
Fanfold
paper
2 3 plies
3 4 plies
4 Reserved
5 Reserved
Figure 2-2 Paper select lever
Figure 2-3 The gap adjust