Compuprint 2056 - Manual (Page 49)

User Manual 2056
MAN10xxx-01 41
Terms Description
EMULATION Specify printer's control commands.
PRT-QUALITY
Choose the printing quality to normal or LQ, when setting to LQ, printer will print
in the highest printing quality.
PRINT DIR
Select the printing direction of the print head: unidirectional, bidirectional or
selected via software.
CHAR. MODE
Select ASCII or Chinese character mode to print when printer receives
character printing task.
INTL CHAR SET
Specify the printer internal character set according to different using
circumstances of international characters.
CHARACTER SET Specify character set as Italic Character or Graphic Character.
CODE PAGE
Select the code page according to different national characters use
circumstances.
COPY MODE According to customer's printing requirement, select the printing capability.
AUTO LF
If this function is on, printer would advance the paper one line automatically
after receiving every carriage return instruction.
TEAR OFF
After select this function on, when the printer has finished printing, paper would
be fed to the set tear off position automatically, and you should tear off the
paper manually.
TEAR POS
Specify the compensated value to aim the continuous paper gap at the tear off
bar of printer.
COVER OPEN
After select this function on, if the window is open, printer would stop printing
with an alarm.
BLACK MARK
After select this function on, printer would carry out black mark detect
instruction so that to make the vertical positioning printing precisely. (Bills or
papers should have black mark on the printed side)
PIN SWITCH
After select this function on, printer would switch different pins to print table line
automatically.
BAUD RATE Specify the printer serial data transfer rate.
PARITY Specify the parity bit for serial data transfer.
DATA BIT Specify the serial data bits.
STOP BIT Specify the serial data transfer stop bit.
PROTOCOL
Specify the protocol of printer serial data transfer as software control
(XON/XOFF) or hardware control (DTR).
PIN TEST
Select the broken pin. Printer would automatically replace it with other pin to
print.
Note: Letter Quality is only valid when the printing speed is
normal.