Compuprint 2056 - Manual (Page 55)

User Manual 2056
MAN10xxx-01 47
Alignment adjustment includes normal print mode adjustment and copy mode adjustment.
Alignment test and adjusting procedure of normal mode adjustment:
1. Turn on the printer, and then install 80 columns tractor paper correctly.
2. In the online mode, press and hold on the LOAD/EJECT key and TEAR key until the
PAPER OUT
and ONLINE LEDs blink simultaneously, the printer enters the alignment
adjust mode and print out the DPI alignment setting.
3. After entering the alignment adjust mode, press the following keys to adjust the degree
of make columns:
EJECT/LOAD
Each press on this key, the even line would move left with one step
(the adjusted value is increased)
Press ONLINE key to check the result.
LF/FF
Each press on this key, the even line would move right with one step (the
adjusted value is decreased)
Press ONLINE key to check the result.
TEAR
Switch to the next DPI adjust state
ONLINE
Store and print the current settings
4. Restart the printer and exit the alignment adjust mode.
Alignment test and adjusting procedure of copy mode adjustment:
1. Turn on the printer, and then install 80 columns tractor paper correctly.
2. In the online mode, press and hold on the LF/FF key and TEAR key until the PAPER
OUT
and ONLINE LEDs blink simultaneously, the printer enters the alignment adjust
mode and print out the DPI alignment setting.
3. After entering the alignment adjust mode, press the following keys to adjust the degree
of make columns:
EJECT/LOAD
Each press on this key, the even line would move left with one step
(the adjusted value is increased)
Press ONLINE key to check the result.
LF/FF
Each press on this key, the even line would move right with one step (the
adjusted value is decreased)
Press ONLINE key to check the result.
TEAR
Switch to the next DPI adjust state
ONLINE
Store and print the current settings
4. Restart the printer and exit the alignment adjust mode.
Note: Alignment adjust mode would affect the printing quality, think it over
before adjusting and be strict to the instructions while adjusting.