Compuprint 2056 - Manual (Page 36)

User Manual 2056
MAN10xxx-01 28
2. Close the window, and pull paper select lever toward the cut sheet position.
3. Raise the printer rear cover to the proper position (shown as figure 3-3), then turn on the
printer.
4. Slide the right paper guide of the back cover to the range of the scale. Then adjust the left
paper guide to make the distance match the width of the print paper. (Shown as below)
Figure 3-2 Adjust the paper select
Figure 3-3 Adjust the position of the rear
Figure 3-4 Adjust the right and the left paper guides
Rear cover