Compuprint 2056 User Manual
Page 50
Advertising
User Manual 2056
MAN10xxx-01 42
3.4 Restore the Factory Default Settings
1. Hold on pressing the TEAR, LOAD/EJECT and LF/FF keys on the control panel at the
same time while turning on the printer. The PAPER OUT and ONLINE LEDs on the
control panel blink 3 times simultaneously and the printer beeps twice to confirm that
printer’s settings have been reset.
2. Loosen the keys and switch the printer off and turn it on again.
3. After these steps, the printer restores the factory default settings
Note: After restoring all the factory default settings, network setting parameters
resume default value at the same time.
Advertising