Comtech EF Data CRS-200 REDUNDANCY SWITCH - Manual (Page 5)

CRS-200 COMTECH COMMUNICATIONS CORPORATION
CRS-200 REDUNDANCY SWITCH - OPERATIONS MANUAL PAGE 3
All 'D' type connectors attached to the plug-in interface cards must have back-shells
that provide continuous metallic shielding. Cable with a continuous outer shield
(either foil or braid, or both) must be used,
and the shield must be bonded to the
back-shell.
All plug-in interface cards must be secured tightly to the back panel by the built-in
captive screws. Blank panels must be used on all un-used Traffic Modem Interface
slots.
The equipment must be operated with its cover on at all times. If it becomes necessary
to remove the cover, the user should ensure that the cover is correctly re-fitted before
normal operation commences.