Comtech EF Data SNM-1001 - Manual (Page 84)

SNM-1001 Network Control Modem Remote Control Operation
Rev. 1 A–25
Bulk Consol
Status
(Continued)
Parameter
Number
Parameter Name
(Command Reference)
Description
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
Demodulator IF frequency
(ref. "DF_" command).
Demodulator rate
(ref. "DR_" command).
Demodulator preset A assignment
(ref. "ADRA_" command).
Demodulator preset B assignment
(ref. "ADRB_" command).
Demodulator preset C assignment
(ref. "ADRC_" command).
Demodulator preset D assignment
(ref. "ADRD_" command).
Demodulator preset V assignment
(ref. "ADRV_" command).
Descrambler enable
(ref. "DE_" command).
Differential decoder enable
(ref. "DDEC_" command).
RF loopback
(ref. "RFL_" command).
IF loopback
(ref. "IFL_" command).
Sweep center frequency
(ref. "SCF_" command).
Sweep width range
(ref. "SWR_" command).
BER threshold
(ref. "BERT_" command).
Demodulator type
(ref. "DT_" command).
Demodulator decoder type
(ref. "DDT_" command).
Receive BPSK Data Ordering
(ref. "RDA_" command).
Transmit clock source
(ref. "TC_" command).
Transmit clock phase
(ref. "TCP_" command).
p17 = nnn.nnnn, demodulator IF frequency in MHz.
p18 = nnnn_mmm.mmm, code rate/data rate in kbit/s.
p19 = nnnn_mmm.mmm, code rate/data rate in kbit/s.
p20 = nnnn_mmm.mmm, code rate/data rate in kbit/s.
p21 = nnnn_mmm.mmm, code rate/data rate in kbit/s.
p22 = nnnn_mmm.mmm, code rate/data rate in kbit/s.
p23 = nnnn_mmm.mmm, code rate/data rate in kbit/s.
p24 = n, where 'n' is '0' (off) or '1' (on).
p25 = n, where 'n' is '0' (off) or '1' (on).
p26 = n, where 'n' is '0' (off) or '1' (on).
p27 = n, where 'n' is '0' (off) or '1' (on).
p28 = snnnnn, sweep center frequency in Hz.
p29 = nnnnn, sweep range in Hz.
p30 = xxxx, BER threshold.
p31 = n, where 'n' is '0' (EFD), '1' (INTL), '2' (CSC), or '3'
(FDC).
p32 = n, where 'n' is '0' (SEQ) or '1' (VIT).
p33 = n, where 'n' is '0' (NRM) or '1' (INV).
p34 = n, where 'n' is '0' (INT), '1' (REF), or '2' (EXT).
p35 = n, where 'n' is '0' (NRM), '1' (INV), or '2' (AUTO).