Redundancy-config?-on--- -converter-#-01, Redundancy-config?-on--- -converter-#-02, Redundancy-config?-on--- -converter-#-03 – Comtech EF Data UT-4500 Series User Manual
Page 71: Activate-backup:-forced
Advertising
![background image](/files/778940/content/doc071.png)
UT4500 Series Up Converter
MN/UT4500.IOM
Remote Control
Revision 2
53
Figure 33 shows the front panel displays after the backup has forced converter 1 offline.
Note the online LED allows the user to tell whether the backup is currently active and
which converter is being by passed.
POWER ON
TRANSMIT
REMOTE
ON LINE
FAULT
STORED FAULT
STATUS
CONV-01-OFFSET=+00.00-DB
-ACTIVATE-BACKUP:-FORCED-
REDUNDANCY-CONFIG?-ON---
-CONVERTER-#-01---------
POWER ON
TRANSMIT
REMOTE
ON LINE
FAULT
STORED FAULT
STATUS
REDUNDANCY-CONFIG?-ON---
-CONVERTER-#-02---------
POWER ON
TRANSMIT
REMOTE
ON LINE
FAULT
STORED FAULT
STATUS
REDUNDANCY-CONFIG?-ON---
-CONVERTER-#-03---------
POWER ON
TRANSMIT
REMOTE
ON LINE
FAULT
STORED FAULT
STATUS
Figure 33. Forced BU of Converter #1
Advertising