Digital Alert Systems DASDEC-II MANUAL - Manual (Page 145)

Digital Alert Systems: DASDEC User Manual
139
Encoder > Send Alert > One Button Alert web page
There are two ways to send reconfigured one button test alerts. In either case, the alert is sent immediately with
the current clock time as the effective alert start time and no confirmation dialog is presented.
1. Click the button on the One-Button EAS page.
2. Press the DASDEC II front panel button once, wait a second and press it again once.
Use the hyperlinks at the bottom left of the page if changes are needed for Audio Output Levels, FIPS codes,
and Front Panel Button enable.
The header and translation toggle options and the Alert Origination Action table option works the same as on the
General EAS screen. See Chapter 5.1.1 General EAS.
6.1.2.1 One-Button Alert: Multistation mode
When the DASDEC II Multistation feature is licensed and at least one station is enabled, the One-button
EAS page displays added options to support individual station origination. See the screen shot below.