Digital Alert Systems DASDEC-II MANUAL - Manual (Page 9)

Digital Alert Systems: DASDEC User Manual
3
*****App­notes to help you configure your DASDEC*****
As of August 2012, here is a list of the available app-notes online to help you configure your DASDEC. Theses app-notes
were created as quick guides to do certain configurations and work with the user manual to give you an advantage towards
setting up your DASDEC correctly. To access them, go to
http://www.digitalalertsystems.com/resources_application_notes.htm . There you can open a PDF file for each of these app-
note topics listed.
Interfacing your DASDEC™ with a Cayman Graphics® Power CG™
Configuring a DASEOC to send alerts to IPAWS
E-Mail Configuration
Expansion GPIO Specifications and Configuration
DASDEC™/One-Net™ TCP/IP Port Table
Disabling Text-To-Speech (TTS) on the DASDEC™
DASDEC™ EAS Monitoring Inputs Quick Wiring / Configuration Guide
Step-by-Step Guide to Programming Your DASDEC™-II
DASDEC™ Interfacing to Monroe Model R198 Networked Multichannel AES/EBU Audio Switcher
EAS-Net Provisions for EAN and EAT
Interfacing DASDEC with CAP Servers
Setting up a Printer on the DASDEC™-II
DASDEC™ interface with Inovonics 730 RDS Encoder
MultiStation 2 and MultiStation 5 Setup
DASDEC™ Interfacing to Broadcast Devices Inc. GPM-300 Series General Purpose Matrix
Switcher
DASDEC™ - Fox® Splicer™ Integration
DASDEC™-II & SpectraRep® AlertManager™ Integration
Development / Interface Requirements for DASDEC™ RS-232 Serial Protocols
DASDEC™ Postscript Printer Setup using "printconf"
Alert Forwarding over IP with EAS-Net™
PuTTY SSH Client on Windows® to remote DASDEC
DASDEC™ Digital Audio Insertion with BDI AES-302
Multichannel Crawls and Digital Audio/Switching for DASDEC™ with MultiStation™ Option