Digital Alert Systems DASDEC-II MANUAL - Manual (Page 158)

152
Digital Alert Systems: DASDEC User Manual
2. Originating an Emergency Alert
In the beginning of the section, you configured your settings for setting up a general Encoded Emergency Alert. So
this will be pretty simple.
To create an originated alert to forward over your broadcast, go to
Encoder > Send Alert > General Alerts and
configure the options to how you want your alert to look. The options are put into six steps for you. An example of
setting up an alert is shown below in a screenshot:
To forward the alert over your broadcast, click on Send Alert , and then you will be sent to a confirmation page.
Confirm the alert, and it will be sent out over your broadcast.