Digital Alert Systems DASDEC-II MANUAL - Manual (Page 42)

36
Digital Alert Systems: DASDEC User Manual
To set the outgoing email server name using authentication (port 587):
 Select
Setup Email >Email Server. From this page you can set the name of the SMTP server for
outgoing Emails from the DASDEC II.
 Enable
the Use Authentication? Option.

Provide a username and password for authentication.

Enter a name in the text field after Outgoing Email Server and click Set & Test Mail Server Name.

The DASDEC II will attempt to contact this Email server.

If it succeeds, the message "OK: Contacted Email Server" will display under the name.
To test if Email can actually be sent via the chosen Email server, type a valid Email address in the To: text
field and click Send Test Email. If this works, the chosen recipient should receive an Email.
Setup > Email > Email Server: Using authentication
4.5.2 Event Email
This page allows the user to the ability to have Event logs emailed either weekly or monthly, and to be
emailed when a successfully or failed login to the DASDEC II has occurred.
Emailing EAS Event Reports
Check either of the boxes to disable or enable Emailing of Event Reports either on a monthly or weekly
basis. If enabled, enter the Email address in the Email To: field.
Server Access Reports
Check either of the boxes to disable or enable Emailing of Server Access Reports. If enabled, enter the
Email address in the Email To: field.