Digital Alert Systems DASDEC-II MANUAL - Manual (Page 40)

34
Digital Alert Systems: DASDEC User Manual
Change Password
Enter the current password, then re-enter the new password twice in the fields provided. Only Admin can change
the Admin password. Information about the modification date for the password is given. After 180 days, the
DASDEC II will recommend changing the password. Click . Changes are effective immediately.
Delete this User?
This button is shown only when the Admin account is editing a non-Admin user. Clicking this
button will immediately remove the account currently selected for editing.
Add New Server User Account Type
Use this section to add a new user account. Make sure that the User account pull-down is set to Admin. Enter an
unused login name, set the permission level, add an optional comment, and type the password information as
directed on the screen. Then click .
Following is a brief description of each of the entry fields.
Enter unused login
This field is where you type in the new user account name. The user account must be an unused name.
Set permission level
A permission level for non-Admin users can be granted by an Admin user with the pull-down menu: View
Only, Basic Operation, Operation, Operation/Control, or Administration. Each page in the DASDEC II
has a permission level for entry/access. For instance, only a user with Administration permission may
access the Setup Users page. Trying to access a DASDEC II page without the proper permission level will
display a message explaining the required permission level. See chart below.
Enter Account Comment
A simple text comment can be attached to non-Admin user accounts.
Set Password for new account
Enter a password, then re-enter the new password in the field provided. Passwords must be at least 8
characters long. After 180 days, the DASDEC II Web interface will recommend changing the password when
the user account is viewed under Setup > Users.
Click . Changes are effective immediately.
User Permission Levels Chart
Administration Level: Unlimited permission
Operation/Control Level: Everything except:
A. Upgrades
B. Software Licensing
C. Debug Log enable/disable
D. Web interface user setup/modification
E. Log deletion
F. Networked GPIO IP setup
G. Network setup
H. Network security setup
Operation Level: Everything Operation/Control can do except:
A. Decoder channel enable/disable
B. Encoder required test setup
C. Configuration backup interface
D. Time setup