Getting to know the incu – Fluke Biomedical INCU Incubator Analyzer User Manual
Page 16
INCU
Operators Manual
1-4
Getting to Know the INCU
Sensors are integrated and stored within INCU. Open INCU
by releasing the
latch on the top cover. Fold the covers open to expose the sensors when
taking measurements. Figure 1-3 shows the location of each sensor.
•
Temperature Sensor T1:
Used for Convection measurements.
•
Temperature Sensor T2:
Used for Convection or Radiant
measurements; used with radiant baby adapter supplied with INCU.
•
Temperature Sensor T3:
Used for Convection measurements.
•
Relative Humidity:
Located in right top cover (cover must be open
for proper measurements).
•
Air Flow:
Detachable for storage.
•
ON/OFF Switch:
Top cover engages this switch to turn power off to
INCU automatically, if the master On/Off switch is left in the ON
position and the top covers are closed (master switch is on the left
side of the exterior).
•
Temperature Probe Holder:
Used to hold temperature probe T2
when taking convection measurements. This is a mechanical
connection only; there is no electrical connection.
Figure 1-3. INCU sensors