Fluke Biomedical INCU Incubator Analyzer - Manual (Page 22)

INCU
Operators Manual
2-2
Unpacking and Inspection
Before unpacking the INCU, visually inspect the shipping box for damage.
If no damage is evident, unpack the INCU and use the checklist below to
ensure that you have received the instrument accessories. Save the foam
inserts and shipping box. You must use the original packing materials when
shipping the INCU for service or re-calibration. If the original shipping
carton and packing materials are not available, call a Fluke service
representative for assistance.
If the shipping box is damaged, unpack the analyzer and inspect it for visible
defects.
If the instrument is damaged, notify the carrier and your local dealer or
service center. Keep the shipping cartons and packing materials for the
carrier's inspection. Call a Fluke service representative to arrange for repair
or replacement of your instrument without waiting for the claim against the
carrier to be settled.
After unpacking the INCU, use the following checklist to ensure that you
have received everything. In addition to the analyzer and this manual
(P/N 3901000), you should have the following:
• A Transport Bag, P/N 2248900
• An Air Flow Sensor, P/N 2239025
• PC Software CD ROM, P/N 2213919
• AC Battery Charger with Country Adapters for the USA, Europe,
Australia, or the UK, P/N 2213937
• 9-Pin to 9-Pin Serial Cable, P/N 2238834
• Temperature Probe Holder, P/N 2213928
• Radiant Baby Assembly, P/N 2239002
• Certificate of Calibration
• Declaration of Conformity
• Fluke Biomedical Warranty Card Information