Fluke Biomedical INCU Incubator Analyzer - Manual (Page 54)

INCU
Operators Manual
5-2
Electrical Safety
Cleaning
The system is to be cleaned with a damp cloth on the exterior only. A
solution of 70% isopropyl alcohol may be used to remove stains and clean
the system. No other solvents are recommended.
Air Flow Sensor
The Air Flow Sensor has been calibrated for use with each INCU. If an Air
Flow Sensor is lost or misplaced, the unit must be returned to the factory or
to a certified service center for recalibration. Failure to do so will result in
invalid Air Flow readings.
Preventive Maintenance
Only authorized, qualified technicians should perform annual verification
and calibration of the INCU unit according to the manufacturer's
recommended procedures.
Warning: For safe operation, use only the specified AC Charger with the
INCU. Use of any charger other than that specified may result
in a hazardous condition.