Fluke Biomedical INCU Incubator Analyzer - Manual (Page 40)

INCU
Operators Manual
4-2
Introduction
The full capability of the INCU is realized when used in conjunction with the
provided PC application.
The provided PC software for INCU is used to:
• Select the measurement interval (1-10) minutes
• Select the total recording period (35 hours max)
• Display recorded data in graphical form
• Print a provisional monitoring sheet
• Create backup files that can be used by a spreadsheet program such
as Microsoft® Excel.
Configuring the INCU for Data Acquisition
1. Connect all sensors
2. Press the On/Off button for approximately one second.
3. Wait until the INCU has completed the initialization sequence.
4. Using the supplied RS-232 cable, connect the INCU to a PC that is
loaded with the INCU PC software as shown below.
5. Double-click on the installed icon to start the INCU PC software.
Figure 4-1 shows an example of a PC interconnected with an INCU.
Figure 4-1. PC interconnected with the INCU
COM PORT