Select – Fluke Biomedical INCU Incubator Analyzer User Manual
Page 30
INCU
Operators Manual
3-4
!
event
select
Event Key
Press this key for approximately 1 second to mark a
particular value or a pause in the recording sequence.
As a result, the action is recorded and then displayed
on the History Graph Sheet and Parameter Numerical
List (see Appendix B, Report Examples).
For an explanation of the significance of each marker,
see "Transfer Data to the PC Software" in Chapter 4,
INCU PC Software Operation.
Note:
It is possible to store 5 events. The stored
events cannot be deleted.
Sensor Key
1. First mode:
• Each time this key is pressed for
approximately 1 second, the next
sensor is displayed (one of the 7
currently active sensors, in order).
2. Second mode:
• Pressing this key two times quickly
allows you to scroll through the
channels. Press the key a third time to
freeze the display.