FSR PATHFINDER Covers 12X8 THROUGH 32X32 - Manual (Page 16)

16 Pathfi nder Matrix
RJ-45 LAN Interface Cabling
This port is used to access the Pathfi nder Matrix via TCP-IP
from a host computer or network.
Cable type:
RJ-45 Crossover for direct computer to Pathfi nder Matrix
control
RJ-45 Straight through for Network to Pathfi nder Matrix
control
Recommended Maximum Length: 329 feet
Crossover Cable
Standard Patch Cable
RS-232 Remote Host Port Cabling (DB9)
The Pathfi nder Matrix has a standard RS-232
(DB9F) communication port that connects the
host PC to the Rack Unit allowing control and
confi guration.
Cable Type: Straight through DB-9 Male (To
mate with Female on Rack Unit) to DB-9
Male (to mate with DB-9 Male on typical PC
COMM port).
Recommended Maximum Length: 50 ft
7
5
8
3
2 RX
TX
RTS
GND
CTS
DB9M
(DTE)
7
5
8
3
2
DB9F
CABLE
GND
RX
TX
PC
(typical)
DB9M
RTS
CTS 7
5
8
3
2
7
5
8
3
2
Optional Flow Control Connections
If the device requires DSR, CD, or DTR,
implement loop -back handshake at the
device end of the cable as shown .
RN Remote
RS-232
Host Port
4
2
6
DTR
CD
DSR
4
2
6
NOTE: The default IP Address is: 192.168.0.243