FSR PATHFINDER Covers 12X8 THROUGH 32X32 - Manual (Page 27)

Pathfi nder Matrix 27
VIDEO TYPE
A unique feature of the Pathfi nder Matrix series is the ability to confi gure outputs (and inputs) for
not only the default video type, but also be able to split the port in order to output video types. When
an output is set to split mode, an RGB matrix port can be confi gured as:
One RGB port, (Default) •
One Component video •
One S-Video and one composite •
Three Composites. •
The ports will default to RGB.and NATIVE for the VIDEO TYPE.
If the user wishes to split an output in order to use another video type(s), the user positions the
cursor to VIDEO TYPE and presses SELECT. The user can toggle between NATIVE and SPLIT by
using the up and down buttons.
If the output is split and the user selects NATIVE, the front panel will simply return to the default
video setting of RGB.
If the user chooses SPLIT , and presses the SELECT button, the screen will change to allow the user
to scroll through and select one of fi ve pre-defi ned split confi gurations. The screen will look like this:
ESCAPE
SELECT
SPLIT SETUP
A RGB >
B RGB
C RGB
SAVE
The "A-B-C" (labeled R-G-B on the unit) designations refer to the physical location of the video
cards from top to bottom in the Pathfi nder Matrix chassis Pressing the UP and DOWN buttons will
scroll through the fi ve available confi gurations. In this example the output is set to one S-video and
one Composite video
ESCAPE
SELECT
SPLIT SETUP
A SVIDEO *
B SVIDEO
C COMPOSITE
SAVE
Pressing SAVE will store the selected confi guration for that output. The user can then select another
output to set up, or press the ESCAPE button to return to the OUTPUT SETUP menu.