FSR PATHFINDER Covers 12X8 THROUGH 32X32 - Manual (Page 36)

36 Pathfi nder Matrix
OPERATING MODE
The main purpose of the matrix is to connect inputs to outputs; the front panel is one method of
accomplishing this. The main screen is used and will look something like this:
MAIN OPERATING PAGE:
Main operating page with audio option
ESCAPE
SELECT
PRESET VOL
PATHFINDER
Pressing the VIDEO button for connecting video, the AUD button for switching audio, both VIDEO
and AUD to switch both. Pressing the VOL button allows the user to select and adjust an output
audio level. Pressing the PRESET button allows the user to select a preset to execute.
Main operating page without audio option
ESCAPE
SELECT
PRESET
PATHFINDER
The main screen is used to select the connection type, and which inputs and outputs are to be
connected. Pressing the VIDEO button sets the connection as a video connection. Pressing the
AUDIO button sets the connection as a audio connection Pressing both the VIDEO and AUDIO
buttons indicate that the connection will connect both the video and audio. The user may also press
an input or output select button at this screen that would cause the matrix to go into connection
mode. When connection mode is entered in that manner, the front panel will light both the audio and
video lamps.