GAI-Tronics LE200, LE200-FSR, LE200-FLR Page/Party Line Extenders - Manual (Page 10)

Pub. 42004-701L2F
M ODEL LE200 S ERIES W ALL -M OUNT P AGE /P ARTY
®
L INE E XTENDERS P AGE 8 of 50
f:\standard ioms - current release\42004 instr. manuals\42004-701l2f.doc
04/09
Wiring
The Model LE200 provides the interfaces for customer connections described below. All of the
terminations on the PCBAs support a wire size range of No. 24 AWG to 12 AWG.
Figure 7. Wiring Connections
Power Connections
WARNING
The input voltage selector switch must be in the appropriate position before
power is applied to the Line Extender.
The Line Extender provides a double-pole circuit breaker for the input power. This input voltage may be
set to either 115 V ac at 50/60 Hz or 230 V ac at 50/60 Hz via an input selector switch, which is located
on the +48 V Power Supply.
A ground and spare terminal block are located next to the double-pole circuit breaker. The orange wire
found in GAI-Tronics system cable can be terminated at this spare terminal.