GAI-Tronics LE200, LE200-FSR, LE200-FLR Page/Party Line Extenders - Manual (Page 39)

Pub. 42004-701L2F
M ODEL LE200 S ERIES W ALL -M OUNT P AGE /P ARTY
®
L INE E XTENDERS P AGE 37 of 50
f:\standard ioms - current release\42004 instr. manuals\42004-701l2f.doc
04/09
Table 40. Input/Output Terminations PCBA (Model 69442-xxx)
Refer to Figure 5 for component locations.
Designator Type Function
J1 DB-25 connector Connect to J3 on Main PCBA (69443-xxx) via ribbon cable
TB1 Terminal block Field connections for contact output #1
The board’s silkscreen indicates the connections; the pin
numbers are not labeled.
TB2 Terminal block Field connections for contact output #2
The board’s silkscreen indicates the connections; the pin
numbers are not labeled.
TB3 Terminal block Field connections for contact output #3
The board’s silkscreen indicates the connections; the pin
numbers are not labeled.
TB4 Terminal block Field connections for contact output #4
The board’s silkscreen indicates the connections; the pin
numbers are not labeled.
TB5 Terminal block Field connections for contact output #5
The board’s silkscreen indicates the connections; the pin
numbers are not labeled.
TB6 Terminal block Field connections for page audio detected contact output
The board’s silkscreen indicates the connections; the pin
numbers are not labeled.
TB7 Terminal block Field connections for page ground fault contact output
The board’s silkscreen indicates the connections; the pin
numbers are not labeled.
TB8 Terminal block Field connections for contact inputs #1, #2, and #3
The board’s silkscreen indicates the connections; the pin
numbers are not labeled.
TB9 Terminal block Field connections for contact inputs #4 and #5
Field connections for chassis ground
The board’s silkscreen indicates the connections; the pin
numbers are not labeled.