Install the hand torch consumables, Install the hand torch consumables ‑5 – Hypertherm HRT User Manual
Page 23
Advertising
TORCH SETUP
Duramax Retrofit Torch
Operator Manual
2-5
Install the hand torch consumables
To operate the hand torch, a complete set of consumable parts must be installed: shield, retaining
cap, nozzle, electrode, and swirl ring.
With the power switch in the OFF (O) position, install the torch consumables as shown below.
Retaining cap
Electrode
Swirl ring
Shield
WARNING
INSTANT-ON TORCHES
PLASMA ARC CAN CAUSE INJURY AND BURNS
The plasma arc comes on im me di ate ly when the torch trigger is
activated. Make sure the power is OFF before changing consumables.
Nozzle
Advertising